Frequency range: 0.1 to 600 MHz Frequency entry: 1 kHz resolution Measurement for 25, 50, 75 and 100-Ohm systems SWR measurement range: 1 to 100 in numerical mode, 1 to 10 in graph mode SWR display: numerical or easily-readable bar R and X range: 0…10000, -10000…10000 in numerical mode, 0…1000, -1000…1000 in graph mode Display modes: – SWR at single or multiple frequencies – SWR, return loss, R, X, Z, L, C at single frequency – SWR graph, 80 points – R, X graph, 80 points – Smith (or polar) chart, 80 points – TDR (Time Domain Reflectometer) graph Optional open-short-load calibration in SWR, R,X or Smith/polar chart graph modes. RF output: – Connector type: N – Output signal shape: square, 0.1 to 200 MHz. For higher frequencies, harmonics of the main signal are used. – Output power: -10 dBm (at 50 Ohm load) Power: – Three 1.5V, alcaline batteries, type AA * – Three 1.2V, 1800…3000 mAh, Ni-MH batteries, type AA – Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used – When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources Interface: – 320×240 color TFT displaty – 6×3 keys on the water-proof keypad – Multilingual menus and help screens – USB connection to a personal computer Dimensions: 23x10x5.5 cm (9x4x2”) Operating temperature: 0…40 °C (32…104 °F) Weight: 650g (23 Oz) Warranty: 2 years GTIN-13: 4820185420037 RigExpert AA-600 is made in Ukraine. Specifications are subject to change without notice. * Batteries are not included with the analyzer.
