Martindale BZ820-EV EVSE Socket Tester – Easy Test for EV Charging Points

DescriptionMartindale BZ820-EV EVSE Socket Tester Easy Test for EV Charging PointsProduct Description:The Martindale BZ820-EV EVSE Socket Tester is a compact and highly effective tool designed for fast and reliable testing of EVSE (Electric Vehicle Supply Equipment) charging points fitted with Type-2 connectors. It is capable of detecting 28 different wiring fault conditions and provides real-time feedback on supply voltage levels. A combination of green LEDs and an audible tone confirms correct wiring, while red LEDs and a warning buzzer signal fault conditions, including polarity and earth wiring issues. The built-in CP mode slider switch simulates vehicle states (A, B, C, and E), allowing comprehensive EVSE socket testing. Designed for ease of use, the tester is ideal for electricians, installers, and EV charging point maintenance personnel seeking a reliable diagnostic tool for EV charger installations.Key Features:Allows for fast and simple EVSE socket testingDetects 28 wiring fault conditions using a combination of LEDs and a buzzerIndicates high and low supply voltage conditionsDirect connection to EVSE charging point via Type-2 plugProvides clear indications for correct and incorrect wiring of Live (L), Neutral (N), and Protective Earth (PE)CP mode simulation with four selectable positions: A, B, C, and EVisual indication of charger CP mode through Type-2 Connector LEDsVoltage low indication below 195V ± 5%Voltage high indication above 270V ± 5�rth-neutral voltage high indication >30V nominalOperates at 230V AC rms, 50HzPower consumption less than 2.5WConforms to BS EN 61010-1:2010 A1:2019 and BS EN 61326-1 standardsSuitable for indoor and outdoor use in dry weatherOperating temperature range from -10°C to 40°C, up to 85% relative humidityOvervoltage category CAT III 300V, pollution degree 2Dimensions: 91mm (L) x 80mm (W) x 38mm (D)Lightweight at just 120gWhat’s Included:BZ820-EV EVSE Socket TesterInstruction Manual