Megger MFT-X1 EVCA KIT Advanced Electricians Multifunction Tester With EVCA210 Electric Vehicle Charging Point Test Kit

DescriptionMegger MFT-X1 EVCA KIT Advanced Electricians Multifunction TesterWith EVCA210 Electric Vehicle Charging Point Test KitSPEAK TO US ABOUT TRADING IN YOUR OLD TESTERRated to CAT IV 300V, the Megger MFT-X1 Multifunction Tester is Megger’s first platform-based multifunction installation tester suitable for checking single- and three-phase domestic, commercial, and industrial electrical installations. An eclectic array of tests ensure you can carry out detailed fault diagnostics and complete all commissioning maintenance, routine maintenance, and reporting/certification requirements for installations.TestsThe Megger MFT-X1 Multifunction Tester offers a wide range of tests including True Loop™ tests with a patented Confidence Meter™, next-generation two-wire and three-wire non-trip loop testing, high resolution 0.001Ω loop tests, automatic volt-drop measurements, and configurable RCD and EV auto-sequences.True Loop™The combination of the latest three-wire, non-trip loop testing technology and a patented Confidence Meter™ delivers a reliable, accurate, and stable loop test that is unmatched within the market. In addition to enabling testing in noisy environments and/or near the supply source, Megger’s True Loop™ prevents RCD uplift, even on circuits protected by 6mA and 10mA protection devices, while reducing test time.Patented Confidence Meter™Megger’s patented Confidence Meter™ indicates the progress of the loop measurements and the degree of noise in the circuit, helping you to acquire a stable and consistent reading. The Confidence Meter™ supports all the Megger MFT-X1 Multifunction Tester’s loop impedance ranges and works to reduce testing times, delivering a seven-second non-trip loop test on quiet circuits.High-Resolution Loop Impedance TestingMegger’s patented Confidence Meter™ and high-current, two-wire loop impedance test provide accurate measurements with a resolution of 0.001Ω and PFC/PSCC current calculation up to 50kA.Stabilised Insulation Test VoltageThe Megger MFT-X1 Multifunction Tester’s stabilised insulation test voltage is accurate to within 2% 2 digits; significantly more precise than the 20% industry standard. As a result, the Megger MFT-X1 Multifunction Tester delivers an accurate voltage output and eliminates the risk of over-voltage damage to circuits or sensitive components.Current MeasurementOptional Megger MCC1010 Current Clamps can be used with the Megger MFT-X1 Multifunction Tester to measure AC current from 1mA to 1000 A.RCD ConfiguratorOptimise RCD testing using the Megger MFT-X1 Multifunction Tester’s RCD configurator. With this tool, you can select the specific RCD tests to be completed within the Auto-RCD Test mode.Similarly, the Megger MFT-X1 Multifunction Tester offers the ability to configure EV auto-sequences.EV Charge Point TestingWhen used with the Megger EVCA Adapter, the Megger MFT-X1 Multifunction Tester can check all EV chargers with RCD Type B- or RDC-protected charge points and can carry out all the relevant maintenance and installation measurements.Clear Display & Easy-to-Use InterfaceEquipped with a high-contrast 480 x 272 colour, TFT bonded display, the Megger MFT-X1 Multifunction Tester has been designed to ensure it is both easy to read and easy to use. To this end, it includes a monochrome black-and-white mode specifically for use in difficult lighting conditions and will change colour depending on which test is selected, again, making it easy to use in dim or dark environments. Furthermore, hot keys for second-level functions are indicated along the top of the display and a second control dial enables fast and easy selection, even when wearing protective gloves.Relevant information is displayed before and after every test, this includes the Confidence Meter™ progress bar, RCD ramp test progress bar, insulation and continuity measurement bar graph, and L-N, L-E, and N-E voltages. Additionally, the Megger MFT-X1 Multifunction Tester provides graphical circuit connection guidance for each measurement to help you through testing.Finally, the Megger MFT-X1 Multifunction Tester’s operating system is future-proof to guard against changing regulations and testing requirements. It can be updated using a microSD card.CertSuite™ CompatibleFully integrated for use with Megger’s CertSuite™ Software Platform (available on a monthly or yearly subscription), test results saved to the Megger MFT-X1 Multifunction Tester can be tagged and transferred to a test certificate or report on an iOS or Android smartphone/tablet with the CertSuite™ App installed. This allows reports to be completed on-site by various users without compromising the security of the data as it is protected by the cloud-based application.Modular BatteryThe Megger MFT-X1 Multifunction Tester can be used with Megger’s Li-Ion battery pack or AA NiMH or alkaline batteries. Smart fuel chip technology optimises battery status accuracy when the Megger MFT-X1 Multifunction Tester is used with a Li-Ion battery pack. Furthermore, the Megger MFT-X1 unique battery pack solution means the rechargeable 4 Ahr Li-Ion battery pack can be swapped out for the AA carrier module, ensuring fast and flexible battery changes while maximising uptime.Megger’s MFT-X1 Multifunction Tester is an industry-leading multifunction installation tester. The Megger MFT-X1 MFT complements its eclectic testing capabilities, including True Loop™ with a patented Confidence Meter™, with practical features such as a colour-changing, TFT bonded display, CertSuite™ compatibility, and a modular battery design.Megger MFT-X1 Multifunction Tester Key Features:Megger’s first platform-based multifunction installation testerCheck single- and three-phase domestic, commercial, and industrial electrical installationsCAT IV 300VCarry out detailed fault diagnosticsComplete all commissioning and routine maintenanceFulfil reporting/certification requirementsTrue Loop™ tests with a patented Confidence Meter™Next-generation two-wire and three-wire non-trip loop testingHigh resolution 0.001Ω loop testsAutomatic volt-drop measurementsConfigurable RCD and EV auto-sequence testsStabilised insulation test voltage to within 2% 2 digitsUse with Megger’s MCC1010 Current Clamps to measure AC current between 1mA and 1000 ARCD configuratorUse with Megger’s EVCA Adapter to test all known EV chargersHigh-contrast, 480 x 272px colour, TFT bonded displayMonochrome black and white display modeThe display changes colour depending on the test selectedHot keys for second-level functions are indicated at the top of the displayRotary dial for selecting testsSecondary dial for selecting optionsEasy to use even when wearing protective glovesRelevant information is displayed before and after every testGraphical circuit connection guidance for each testUpgradable operating systemCertSuite™ compatibleModular battery design enables use with a Li-Ion battery pack, AA NiMH batteries, and alkaline batteriesFast, flexible battery changes maximise uptimeAn industry-leading MFT with eclectic testing capabilities and practical featuresWhat’s Included?Megger MFT-X1 Multifunction TesterMegger EVCA210 Electric Vehicle Charging Point Test AdaptorSP5 Switched Test ProbeRed Test Lead, Probes, Clips, and Croc ClipsBlue Test Lead, Probe, Clips, and Croc ClipsLi-Ion Battery 4400 mAhLi-Ion Battery ChargerSIA 10 Mains Socket Interface Adapter (UK)Neck StrapMultipurpose Hard Base Carry CaseQuick Start GuideMegger Calibration Certificate IncludedThree Year Megger WarrantyCLICK ON THE IMAGE BELOW FOR THE COMPLETE DATA SHEETS:Megger EVCA210-UK Kit Electric Vehicle Charge-Point Test Meter AdaptorWith Type 1 & Type 2 Charger Plug Adaptors EVSE The Megger EVCA210-UK Electric Vehicle Charge Point Adaptor is an easy-to-use instrument, offering an electrical contractor an extensive suite of tools designed for thoroughly testing Mode 3 AC Electric Vehicle charge points. Despite its compact size, when paired with the correct connectors the adaptor is capable of checking both the safety & function of all single or three phase EV charge points. This instrument boasts an input voltage of up to 250V in a single phase system, up to 430V in a three phase system and input frequency of 50/60Hz.Built to simulate the connection of an electrical vehicle to an under test charging point, the Megger EVCA210-UK adaptor is an EVSE tester which can determine if dangerous voltages are present on the PE. The intuitive user interface includes push buttons and a tactile rotary dial for streamlined testing. Alongside the PE pre-test button feature, a CP Error “E” simulation imitates an error on the control pilot circuit whilst a PE Error simulation (Earth Fault) feigns a disconnect of the PE circuit. The rotary switch alternates between providing Proximity Pilot (PP) State simulation and Control Pilot (CP) state simulation. Both tests ensure correct disconnection of the output of the charge point under examination.Measurements on live conductors can be performed by the EVCA210-UK Electric Vehicle Charge Point Adaptor by utilising either the front mounted mains socket or the 4mm connection ports (L1, L2, L3, N and PE). In addition the tester comes complete with two additional CP signal terminals with which an engineer can measure the CP signal using an oscilloscope. For advanced compatibility, this EVSE tester is supplied with:Type 2 Plug for fixed cables with vehicle connectors or charging points featuring panel mounted socket outletsType 1 Plug for charging points with fixed cable and vehicle connector.The lightweight and IP54 rated Megger EVCA210-UK Adaptor is sold with a bespoke soft carry case alongside 2 connection cables as standard. Rated CAT II 300V, the device conducts test in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722 regulations. It is compliant with Low Voltage Directive LVD 2014/35 and in line with EC/EN 61010-1:2010 and IEC/EN 61010-2-030:2010 safety standards.